Specifications

OmniAccess Reference: AOS-W System Reference
118 Part 031652-00 May 2005
z Microsoft Windows Mobile 203/CE 4.2 with built-in L2TP/IPSec VPN sup-
port (PDA)
z Apple MacOS 10.x with built-in PPTP and L2TP/IPSec VPN support
z PalmOS 5.x with built-in PPTP VPN
z Mergic PPTP VPN for PalmOS 3.5—4.x
z Movian VPN for PalmOS 3.5—5.x
z Movian VPN for Microsoft Windows Mobile/CE
z Linux VPNC
Configuring L2TP and IPSec
This procedure applies to configuring L2TP/IPSec on Windows 2003 PDAs.
To configure L2TP/IPSec for generic Windows 2003 PDAs:
1. Exit your browser.
Do not just click OK, you must actually exit the browser. Depending on your
PDA, you may not be able to easily exit applications. If necessary,
press the reset button and start over.
2. Set up a wireless connection with static WEP.
3. Navigate to
Start > Settings > Connections > Edit my VPN servers.
4. Select Add a new server.
Use the following settings:
host IP IP of Alcatel MX loopback address
VPN type IPsec/L2TP
5. Click Next and select A pre-shared key and type the IPSEC pre-shared key
(not the securID that you configured on the switch).
6. Follow the rest of the instructions (your password is the securID).
7. Navigate to Settings > Connections.
8. Select the
Advanced tab.
9. Select
Select Networks.
10. Click
Exceptions.
11. Click
Add new URL.
12. Type */* and click
OK.
By default Windows mobile 2003 uses unencrypted frames to pass browser
data unless it matches the exception list.