Specifications

Security Options 111
Chapter 5
User – When a traffic policy containing the “user” alias is applied to an
authenticated user, this alias is replaced by the IP address assigned to that
user. With this alias, generic traffic policies can be configured that will
automatically be customized at the time of user login.
Mswitch – This policy represents the switch IP address (loopback address or
VLAN 1 address) of the Alcatel switch on which the traffic policy is running.
This alias is used in the captive portal policy, as well as in many destination
NAT policies.
Any – Represents any IP address.
To add a new source/destination alias, click Add, as shown in the figure
below. Configuration options are:
Destination Name – A human-readable name for the alias. This name appears
in all traffic policies making use of this source/destination alias.
Invert – Specifies that the inverse of the addresses entered should be used.
For example, if a network of 172.16.0.0/16 is entered, the “invert” option
specifies that the policy should match everything except 172.16.0.0/16.
FIGURE 5-39 Add Source/Destination Alias