Specifications

OmniAccess Reference: AOS-W System Reference
100 Part 031652-00 May 2005
crypto isakmp policy 10
authentication pre-share
PPTP
PPTP provides an alternative to IPSec that is supported by MacOS, Linux,
PocketPC, Windows 2000, Windows XP, and many other platforms. PPTP is
considered to be less secure than IPSec, but also requires less configuration.
To configure PPTP, navigate to
Configuration > Security > VPN Settings > PPTP as
shown in the figure below.
FIGURE 5-28 PPTP Configuration
Available configuration parameters are:
Enable PPTP Enables or disables termination of PPTP (Point to Point
Tunneling Protocol) clients.
PPTP Echo
Timeout
Amount of time, in seconds, that the system will wait
for a PPTP echo response from the client before
considering the client down. After this interval with no
response, the client will be disconnected
Authentication
Protocols
Configures the PPTP authentication protocol. Currently,
only MS-CHAPv2 is supported.