Specifications

OmniAccess Reference: AOS-W System Reference
96 Part 031652-00 May 2005
bypassed, this method should always be combined with a firewall policy. To
configure encryption type role mapping, navigate to Configuration > Security >
Authentication Methods > L2 Encryption
as shown in the figure below.
FIGURE 5-26 Encryption Type Role Mapping
Available configuration options are:
Condition – Specifies how the value should be matched.
Val ue – Specifies the encryption type that should be matched.
Role Name – Specifies the role that will be applied when the encryption type is
matched.
Equivalent CLI configuration for the example above is:
aaa derivation-rules user
set role condition encryption-type equals open set-
value "guest"
Advanced Authentication
To configure advanced security options, navigate to Configuration > Security >
Authentication Methods > Advanced
. The Advanced tab appears in the figure
below.
Click
Add to create security rules.