Specifications

OmniAccess Reference: AOS-W System Reference
94 Part 031652-00 May 2005
FIGURE 5-24 Stateful 802.1x AP/Server Configuration
Available configuration parameters are:
Configuration Name – Choose a human-readable name to identify the
third-party AP.
IP Address – Specify the IP address of the third-party AP.
RADIUS Server – Choose the RADIUS server with which the third-party AP will
communicate.
Key – Specify the RADIUS secret used between the third-party AP and the
RADIUS server.
The equivalent CLI configuration for the example above is:
aaa stateful-authentication dot1x ap-config Cisco22
ap-ipaddr 192.168.3.22 radius-server-name test key
radius-key
SSID Role Mapping
SSID Role Mapping allows a role to be assigned based entirely on the ESSID
with which the client associates. This is typically used for guest access to
completely bypass authentication. Because authentication is bypassed, this
method should always be combined with a firewall policy. To configure SSID
role mapping, navigate to
Configuration > Security > Authentication Methods > SSID
as shown in the figure below.