Specifications

Left running head:

Chapter name (automatic)

Beta Beta

OmniAccess 5510 Unified Services Gateway Getting Started Guide

Alcatel-Lucent

ONNECTING THROUGH TELNET

Telnet is a user command and an underlying TCP/IP protocol for accessing

remote computers. Telnet allows you to log on as a regular user with preset

privileges to the specific application and data on that remote computer.

Figure 3: Connecting to Internal Network

To establish a Telnet session with the OmniAccess 5510 USG, follow the

procedure below:

Step 1: Connect the RJ-45 cable from the appropriate Ethernet port on the rear

panel of the OmniAccess 5510 USG to the internal router, switch, or hub in your

LAN.

Step 2: Open a Telnet session, for example, to 192.168.1.1.

• From the Windows host, click Start > Run, type telnet 192.168.1.1, and click OK.

• From the Unix/Linux host, from the terminal window, type telnet 192.168.1.1 and

press the Enter key.

Step 3: Enter the user name and password (superadmin/admin, admin) at the

prompt.

You are now ready to access the OmniAccess 5510 USG using a Telnet session.

Ethernet Ports