Specifications

Performing Basic Configuration Tasks
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
10
Alcatel-Lucent
Beta Beta
OmniAccess 5510 Unified Services Gateway Getting Started Guide
On OmniAccess 5510-AA/AB USG:
• HTTPS, SSH, and TR-069 access to the system is enabled.
• Default user name and password (superadmin/admin, admin) is enabled with
‘enable’ password ‘admin’.
• SNMP v2 along with related parameters like community string, user name,
password is enabled.
• All interfaces will be in administratively ‘UP’ state.
• By default, DHCP client is enabled.
• The DHCP server is enabled on VLAN 1 with pool address from 192.168.1.2 -
254. A host connecting to the VLAN 1 interface receives an address between
192.168.1.2 and 192.168.1.254
• VLAN 1 will have default IP address 192.168.1.1
• All switchports will be part of default VLAN 1
• By default, ATM sub-interface comes up with MER encapsulation with DHCP
client enabled on the interface.
• ATM sub-interface comes up with VPI/VCI value as 0/32.
Step 3: You can view the factory default configuration details by executing the
‘show running-configuration’ command.
Example:
The following is an example of show running-config command on the
OmniAccess 5510-SR USG that displays the factory default configuration:
ALU(config)# show running-config
!Current Configuration:
!
! Statlog Configuration
!
logging on
logging buffered priority 7
logging buffered size 128
logging console 3
logging system 5
service timestamps log
logging rate-limit 1 10 tag SWE subtag DOS
logging rate-limit 1 10 tag PVSTD subtag PKT
logging rate-limit 1 10 tag SWE subtag SESSION
!
!
!
!VRF Configuration
!
! MULTICAST Configuration
!NOE port reservation
! PVST Global configuration
!
https enable
ssh enable
snmp enable