Specifications

OmniAccess 5510 USG - Release Notes
September 2010
Supported Hardware/Software Combinations
The following table shows the hardware supported in release 3.0:
Alcatel-Lucent Marketing Number Part Number Release 3.0
OmniAccess 5510-AA USG 902695-90 Supported
OmniAccess 5510-AB USG 902768-90 Supported
OmniAccess 5510-SR USG 902697 Supported
OmniAccess 5510-TE USG 902696 Supported
To determine the OmniAccess 5510 USG hardware configuration, use the ‘show chassis’ command. The
following is an example of the show chassis command on the OmniAccess 5510-ADSL Annex A and
OmniAccess 5510-ADSL Annex B USG:
ALU(config)# show chassis
Physical inventory at Wed Jul 7 14:01:31 2010
System started approximately Wed Jul 7 14:00:33 2010
Uptime is 0 days 0 hours 0 minutes 58 seconds
Current temperature is 42.5 Celsius
OA5510 - OA5510 ADSL ANNEX A (active)
Part number: 902695-90
Module type: 00002003
Serial number: L0286699
Revision: D01
FRU#: 902695-90
Format: 3
Base MAC (MAC bank 1): 00:e0:b1:dd:d1:1e
ADSL Loader version: 1.2
ALU(config)# show chassis
Physical inventory at Wed Jul 7 13:57:44 2010
System started approximately Fri Jul 2 18:43:08 2010
Uptime is 4 days 19 hours 14 minutes 36 seconds
Current temperature is 53.5 Celsius
OA5510 - OA5510 ADSL ANNEX B (active)
Part number: 902768-90
Module type: 00002004
Serial number: K5180823
Revision: D01
FRU#: 902758-90
Format: 3
Base MAC (MAC bank 1): 00:e0:b1:da:30:c8
ADSL Loader version: 1.2
OmniAccess 5510 USG - Release 3.0 Page 5 of 33
032667-10 Rev. A