Specifications

Setting Up Software 9
b. To specify the department or network adminis-
trator for the switch, type system admin-contact
followed by a text-string name you want to use
at the CLI prompt and press <Enter>. For exam-
ple, to specify Networking Corp Customer Service
(800-555-6000)
, type the following at the CLI
prompt and press <Enter>:
-> system admin-contact “Networking Corp
Customer Service (800-555-6000)”
♦ Important Notes ♦
To add spaces between words, you
must include quotation marks (
“ ”)
around the text string when entering
the admin-contact information.
No confirmation message will appear
onscreen. To verify that the system
admin-contact information has been
set, type
system admin-contact at the
CLI prompt and press <Enter>.
c. To view the system name, type
system name at
the CLI prompt and press <Enter>. If no name
has been specified, the following will display:
-> system name
Unset
d. To specify a system name, type system name
followed by a text-string name at the CLI prompt
and press <Enter>. For example, to specify Sales
as the system name, type the following at the
CLI prompt and press <Enter>:
-> system name Sales
♦ Important Notes ♦
The system name must be a single
word or hypenated text string. Do not
use commas, quotation marks or
underscores.
No confirmation message will appear
onscreen. To verify that the system
name has been set, type system name
at the CLI prompt and press <Enter>.
e. To view the system location, type
system
location
at the CLI prompt and press <Enter>. If
no location has been specified, the following
will display:
-> system location
Unset