User manual

Restricted
9
4.2 Profile management
How to add a new profile:
1. Click New
2. Input the correct parameters you get from your Network Operator
(Note: Profile Name/Number/APN is the mandatory to be entered
in)
3. Click Save
How to edit a profile:
1. Select the profile from the Connection Profile list
2. Change the parameters
3. Click Save
How to delete a profile:
1. Select the profile from the Connection Profile list
2. Click Delete
3. On the pop up dialog “are you sure to delete this profile?” Click OK
(Note: the default profile can not be deleted)
How to set as default:
1. Select the profile from the Connection Profile list
2. Click Set default
3. On the pop up dialog “are you sure to set this profile as default?”
Click OK(Note: Once the profile is set as default,(D) it will be
added as a mark)
4.3 Network
• Network Mode: Automatic/4G only/3G only/2G only, default is
automatic
• Network Selection: Automatic/Manual, default is automatic
How to select a Network Manually:
1. Select Manual in the Network Selection
2. Click Apply
3. Click Refresh, to list the available network
4. Choose the Network
5. Click Select to register 2G/3G/3G+/4G;For the Status, Active(the
network registered) Available(the network can be used)
4.4 PIN management
How to enable a PIN:
1. When a PIN is disable, click Enable, the PIN input page is displayed
2. Enter the PIN you want to set, only numbers are accepted
3. Click Apply
How to disable PIN:
1. When a PIN is enable, click Disable, the PIN input page is displayed
2. Enter the correct PIN
3. Click Apply
How to Change PIN: