Restricted USER MANUAL [EE UK ONE TOUCH Y800 user manual]
Restricted Table of contents Safety and use ....................................................................................................................... 3 1. Overview ............................................................................................................................. 3 1.1 System Requirements .................................................................................................. 4 1.2 Screen description..........................................................
Restricted Safety and use We recommend that you read this chapter carefully before using this device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use of this device or of use contrary to the instructions contained herein. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities.
Restricted 1.1 System Requirements To use this device you need a device with WiFi capability (supporting WiFi 802.11 b/g/n) and a web browser. 1.
Restricted Screen icon Category Icon display Signal Strength Network type From 1 signal to excellent signal : EDGE/GPRS 3G+:HSPA+ : UMTS /HSDPA/HSUPA :LTE :SMS is available SMS status :Unread SMS :SMS is full Connection Status connected : WiFi is active :Number of WiFi users WiFi status :WPS is active :WPS connected successfully :WPS connected failed Battery Dial mode Roaming : From 1 level to 4 level :Low power :automatic :manual :on roaming network Note: the information is displayed for 20
Restricted 1. Select Settings 2. Select WiFi 3. Select SSID from the available Networks. ◆ From an Android device: 1. Select Settings 2. Select Wireless Controls 3. Select WiFi settings 4. Select SSID from the available Networks Step 2: Enter the WiFi key when prompted for a security key. (Note: The passkey is the last 8 digits of the IMEI) 2. Web UI configuration 2.1 How to login to the Configuration page 1. Open the Configuration Page 2. Input into the address bar http://ee.
Restricted Fig 2.2 2.2 Main page icon descriptions Category Icon display Signal Strength From no signal to excellent Connection Status SMS Disconnect enable, Connected Unread From lowest power to full power Battery :charging Roaming SIM card status WiFi status in roaming network SIM card is ready; WiFi is active; ;SIM card is not ready WiFi is deactive Tab 2.
Restricted 3. Quick Setup How to change your login Password: • Login Password: Set the password for login. How to set up WiFi settings: • SSID: Set the network name of this device. • Security: Configure the security mode for WiFi connection. 4. Connection You can move the mouse to "Connection" and click the items you want.
Restricted 4.2 Profile management How to add a new profile: in) 1. Click New 2. Input the correct parameters you get from your Network Operator (Note: Profile Name/Number/APN is the mandatory to be entered 3. Click Save How to edit a profile: 1. Select the profile from the Connection Profile list 2. Change the parameters 3. Click Save How to delete a profile: 1. Select the profile from the Connection Profile list 2. Click Delete 3.
Restricted When a PIN is enable, click Change PIN, the PIN input page is displayed 2. Enter the Old PIN/New PIN/Confirm PIN 3. Click Apply (Note: when a PIN code is entered incorrectly 3 times a PUK code is needed, you can obtain this from the Network Operator.) 1. 4.5 Connection Mode Manual: The device dials to connect to Internet by clicking "Connect" button in the connection page. Auto: The device dials automatically to connect to Internet when user turn it on. Default is Auto. 5.
Restricted 2. Click Delete SMS settings: SMS Center Number: You can get it from your Network Operator; SMS Save Mode: the location SMS stored, default is your SIM card; 6. Settings You can move the mouse to Settings and click the items you want.
Restricted 4. 5. 6. 7. Open the Browser In the Browser address bar input 192.168.1.1 Select Settings Select WPS 8. Enable PBC and click button (Note: If the WPS function starts correctly, the information will display in the page as below: "Succeed!" Or "Failed" to indicate the problem happened during the WPS setup.) • PIN: 1. Long press WPS button of this device until WPS shows in the screen 2.
Restricted How to reset: Reset the device to the original factory settings. You can also use the hardware reset button under the back cover, marked with Reset. How to save the configuration: 1. Click Backup 2. Select the location to save current settings How to restore the configuration: 1. Click Restore 2. Select a file saved previously to restore the settings 6.5 Security it is include set new user name,new password. 7.
Restricted 8. Warranty • The device is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1. • Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase. • The vendor or repair center will decide whether to replace or repair this device, as appropriate.
Restricted do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. 9. Q&A How do I access the Configuration page? 1. Open the Web Browser 2. In the Browser address bar input 192.168.1.1 3. Once the Landing page is displayed, then enter the login password which is admin Which browser does this device support? It supports the below: 4. Firefox 5. Safari 4.0.
Restricted 2. Select View Available Networks For a Mac: 1. Click on the AirPort icon and pull the list down 2. Select the SSID from the dropdown menu For Apple IOS devices: 3. Select Settings 4. Select WiFi 5. Choose the SSID from the available Networks For an Android device: 6. Select Settings 7. Select Wireless Controls 8. Select WiFi Settings 9. Choose the SSID from the available Networks What to do if I see the SSID but the device fails to connect? 1.
Restricted You can check the below to ensure it is set up correctly: 1. Check the device Status Display for any error messages or information 2. Refresh your Network list on your computer, to do this please follow the below instructions: For Windows: 3. Click Refresh Network List on the left hand side of the Wireless Network Connection screen 4. Open Network Connections 5. Right click Wireless Network Connection, then select Properties 6. Click the Wireless Networks tab 7.
Restricted 3. Select Connection 4. Select Connection Status How do I connect to the 3G/4G Network? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Connection 3. Select Connection Status 4. Select Connect How do I disconnect from the 3G/4G Network? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Connection 3. Select Connection Status 4.
Restricted 3. Select Connection Status 4. Select Usage History How to search the Network manually? 1. 2. 3. 4. 5. 6. Login to the Configuration Page (refer to How do I access the Configuration page) Select Connection Select Network Choose Manual from the Network Selection list Click Apply Click Refresh How to check the model number and firmware versions of my device? Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Settings 3. Select System 4.
Restricted 2. Select Quick Setup 3. Select WiFi Settings 4. Select SSID How to change the login password? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Quick setup 3. Select Admin Password 4. Select Login Password How do I change the WiFi Key? 5. Login to the Configuration Page (refer to How do I access the Configuration page) 6. Select Quick Setup 7. Select WiFi Settings 8. Select WiFi Key 10.
Restricted Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device. Radiation from the wireless device may erase the information stored on them. Do not put your wireless device and other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. Do not leave your wireless device in a very hot or cold place.
Restricted Switch this device off when you are in health care facilities, except in designated areas. As with many other types of equipment now in regular use,this device can interfere with other electrical or electronic devices, or equipment-using radio frequencies. Switch this device off when you are near gas or flammable liquids. Strictly obey all signs and instructions posted in a fuel depot, petrol station, chemical plant,or in any potentially explosive atmosphere.
Restricted Items of equipment with this symbol are not to be thrown into ordinary bins if your jurisdiction or your region has suitable recycling and collection facilities; instead they are to be taken to collection points for recycling. In the United States, please visit www.recyclewirelessphones.org for more information on recycling wireless products. Protection against theft This device is identified by an IMEI (modem serial number) shown on the packaging label.
