Installation guide

All Rights Reserved © Alcatel-Lucent 2010
Page
20
[appl]
admin_password=111111
Enter the set password in SIP mode
Bluetooth_parameters=
remote_forward_code=
Enter the forwarding activation code.
remote_forward_deactive_code=
Enter the forwarding deactivation code. This
code must be identical with the forward
cancellation prefix defined in the PCX.
power_priority=3
– 1 for critical
– 2 for hight
– 3 for low
asset_id=
asset_id by default is MAC address, it's used in
LLDP inventory management
time_format=0
Enter the time format for set display:
– 0 for 24 hours format
– 1 for AM and PM format
speed_dial_1_first_name=
Enter the first name to display when key 3 is
activated
speed_dial_1_last_name=
Enter the last name to display when key 3 is
activated
speed_dial_1_uri=
Enter the URI or the call number locally dialed
by the set when key 3 is activated
speed_dial_2_first_name=
Enter the first name to display when key 4 is
activated
speed_dial_2_last_name=
Enter the last name to display when key 4 is
activated
speed_dial_2_uri=
Enter the URI or the call number locally dialed
by the set when key 4 is activated