Installation guide

All Rights Reserved © Alcatel-Lucent 2010
Page
14
3.4.
SIP registration
In order to perform SIP registration, some parameters are mandatory in the sipconfig-mac@.txt
file:
authentication_realm=
authentication_name=
authentication_password=
proxy_addr=
registrar_addr=
Refer to SIP configuration files description.
3.5.
Updating SIP binaries
To update SIP binaries on an IP Touch 40x8EE phone, SIP binaries must be made available on the
server as indicated in SIP binary files, and the set must reset. This can be done manually and
automatically.
Manually:
by disconnecting the power cable of the set and plugging it in again.
Automatically:
the set will reset by itself after a polling timer defined in the configuration file (field Binary
polling timer) registered in the set at first initialization. The set monitors the server to check
if new binary files are available. When there are new binary files, the set automatically
restarts and proceeds with a binary update.
After user changes any parameters in admin settings and exits, phone will reset automatically.