Quick Start Guide

6 7
Getting started1.2
Set-up1.2.1
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
Before you install or remove the SIM card, press the raised dot on
the card slot cover to open it. Insert the SIM card until it locks in
place. To remove it, press the SIM card until it unlocks.
For dual SIM models, both SIM 1 and SIM2 can support 2G
and 3G networks.
Installing the SIM 1
Removing the SIM 1
Installing the SIM 2
Removing the SIM 2
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
The charging status bar will not float if your battery is
extendly consumed. To reduce power consumption and
energy waste, when battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce the
backlight time, etc.
Power on your phone1.2.2
Hold down the Power key until the phone powers on. It will take
some seconds before the screen lights up.
Set up your phone for the first time
The first time you power on the phone, you should set following
options: language, date & time, Google account, etc.
Power off your phone1.2.3
Hold down the Power key from the Home screen until the Phone
options appear, select Power off.
IP4696_6040D_QG_Eng_GB_20_130805.indd 6-7IP4696_6040D_QG_Eng_GB_20_130805.indd 6-7 2013-8-5 14:28:422013-8-5 14:28:42