User guides

1.
<TAM ON/OFF>
Press to turn on the answering machine.
Press again to turn off the answering machine.
2.
<PLAY / STOP>
Press to play the message
Press again to stop message playback
3.
<VOLUME UP (+)>
Increase (+) speaker volume during message playback
4.
<VOLUME DOWN (-)>
Decrease (-) speaker volume during message playback
5.
<SKIP FORWARD>
Press to skip the current message and play the next message
6.
<SKIP BACKWARD>
Press to skip backward to the previous message.
7.
<DELETE>
Press once to delete the message during playback
Note: New voice messages will not be deleted.
8.
7-SEG LED DISPLAY
0F->
--
When answering machine is OFF.
--
When answering machine is OFF and no new TAM messages received
0n->
XX
When answering machine is ON where XX is number of messages in TAM memory.
00
Steadily ON: No voice messages in TAM.
XX
Flash: There are XX new voice messages received where XX is from 01 to 58.
ZZ
Steadily ON: There are ZZ old voice messages kept in the TAM memory (no new voice
messages).
F
Flash: The TAM memory is full.
C /XX
Flashing XX alternatively with C: Time is not set and there are XX new or old voice messages
received where XX is from 01 to 58.
XX
Steadily ON: Playing the current XX incoming message.
PL
Steadily ON: Playing the current outgoing message (OGM) either the Answer & Record OGM
or the Answer Only OGM.
r
Flash: new incoming message or memo is now recording.
A
Flash: Remote access is in progress.
XX
Flash: Indicate current volume level XX(01-05) which is flashing at 0.5s,.
9.
<PAGE>
Press to page your handset(s). It will ring for approximately 60 seconds.
Press and hold to enter registration mode for 5 seconds