User guides

• You’ll see the caller’s number (if available) in the Calls list with "Call block" .
Remember: if you’ve blocked a contact, all the numbers in the same contact will also be blocked.
11.1.10. How to add numbers straight to your Blocked and Allow lists
Aside from adding numbers to your Block and Allow list as calls come through, you can also add numbers
directly to the lists via your Call Control menu.
11.1.11. To add a number to the block list
1. In idle mode, press <block>.
2. Follow the instructions to set your PIN or enter your PIN and select OK.
3. Call Blocking is highlighted, press Select or OK.
4. Scroll down using <Calls> to Block numbers and press Select or OK.
5. Add number is highlighted, press Select or OK.
6. Enter the telephone number you want to block and press Save.
11.1.12. To block numbers by area code
You can also block numbers by area code. This will mean that any calls beginning with that code will be
blocked.
1. Follow the instructions above from 1 to 3 and then:
2. Scroll down using <Calls> to Area codes, press Select or OK.
3. On first use, you will see “No area codes stored. Add code?” Select Yes.
4. Add the area code (e.g. 01473) and press Save.
11.1.13. To add a number to the allow list or to unblock a number
1. Follow the instructions above from 1 to 3 and then:
2. Scroll down using <Calls> to Allow numbers and press Select or OK.
3. Add number is highlighted, press Select or OK .
4. Enter the telephone number you want to allow and press Save.
11.1.14. Deleting your blocked and allowed lists
When in the Block and Allow number menu, you also have the choice to delete the whole list.
11.2. Do not disturb
1. In idle mode, press <block>.
2. Follow the instructions to set your PIN or enter your PIN and select OK.
3. Scroll down using <Calls>.
4. Do Not Disturb is highlighted, press Select.
5. Press <Left> or <Right> to select On, Off or Timed.
6. If you select Timed you need to select the on and off times you want, press <Calls> and enter the on time,
then <Calls> again and enter the off time.
7. Press <Calls> to highlight whether you want VIP calls to be Allowed or Barred using <Left> or <Right>,
then press Save. The chosen setting will be displayed and you will hear a confirmation tone.
11.3. Assign VIP status to a contact
1. In idle mode, press <block>.
2. Enter the access PIN and select OK.
3. Press <Calls> to highlight VIP list and press Select or OK.
4. Read the prompt and select Info, read the message and select Yes at the end. Your contacts list will be
displayed.
5. To assign contacts as VIP, highlight the contact and press OK. Select additional contacts if required by
repeating above.
6. Select Options. Add selected will be highlighted, press OK and the selected entries will be added to
your VIP list.