User guides

F860 Voice
A/W no.: 10002399 Rev.0 (EN)
Printed in China
Press , press or to select Call Block
Press , press or to select Block set
Press , press or to select ON (manual mode)
OR
In idle mode, press to access BLOCK SET. directly.
After you enable this option, the call block icon will be displayed on the
LCD.
1.2. Add numbers to Blacklist
In idle mode,
1. Press key, BLOCK SET. is displayed, or
Press to press or to select CALL BLOCK, press to show
BLOCK SET.
2. Press or to select BLOCKLIST.
3. Press , press or to select ADD, enter number to be blocked,
press to save.
NOTE: 2 more ways to add incoming and outgoing call numbers in Block list:
1. From incoming call numbers
- Press , press or to select CALL LIST or press and hold .
- Press , press or to select call list entry.
- Press , press or to select to ADD to BLIST.
- Press to show selected number, press to save to Block list.
2. From outgoing call numbers
- Press , press or to select redial list entry.
- Press , press or to select to ADD to BLIST.
- Press to show selected number, press to save to Block list.
1.3. Edit numbers in Blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select EDIT,
press or to select number to be edited, press to edit, and then
press to save.
MENU CALL BLOCK BLOCK SET. OFF
ON
VIP OK*
CONTACTS OK
MENU CALL BLOCK BLOCK SET. OFF
ON
VIP OK
CONTACTS OK
1.4. Delete numbers in Blacklist
1.4.1. Delete a number from blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select DELETE, press or to select
number to be deleted, press .
1.4.2. Delete all numbers from blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select DELETE ALL, press , CONFIRM?
is shown, and then press to confirm.
2. Automatic call block mode
2.1. VIPs only
In this restrictive automatic mode, only calls from numbers registered as VIP
in your phonebook will go through and make your phone ring.
MENU CALL BLOCK BLOCK ANONYM
ALL
OFF
PRIVATE*
Press , press or to select Call Block
Press , press or to select Block set
Press , press or to select VIP OK (Automatic mode)
2.2. Contacts only
In this broad automatic mode, only calls from contacts registered in your
phonebook (normal and VIP) will go through and make your phone ring.
Press , press or to select Call Block
Press , press or to select Block set
Press , press or to select Contacts OK (Automatic mode)
3. Anonymous call block mode
This feature allows you to block numbers that do not display a number on
your phone. It can be enabled or disabled independently from the previous
call block modes.
Press , press or to select Call Block
Press , press or to select Block anonym
Press , press or to select one of the options
3.1. Block Private Calls
This mode will block incoming calls that have been purposely kept their
numbers private from you.
In idle mode,
1. Press key, BLOCK SET. is displayed, or
Press to press or to select CALL BLOCK, press to show
BLOCK SET.
2. Press or to select BLOCK ANONYM.
3. Press , press or to select PRIVATE, press to confirm.
4. will be displayed on the lower side of LCD.
3.2. Block All Anonymous Calls
This mode will block all incoming calls, including private calls, international
calls, pay phone and other out-of-area calls.
In idle mode,
1. Repeat step 1 and 2 in Section 3.1.
2. Press , press or to select ALL, press to confirm.
3. will be displayed on the lower side of LCD.
3.3. Set Block Anonymous Calls OFF
In idle mode,
1. Repeat step 1 and 2 in Section 3.1.
2. Press , press or to select OFF, press to confirm.
3. will only disappear from the LCD if the regular call block (see 1. And 2.)
is also set to OFF.
Please read carefully the user guide included in this box. F860 Voice is an
approved equipment in accordancewith the European regulations, attested by
the CE marking. The product you just bought is a technological product, it
must be handled with care.
Note: You have a legal warranty on this product in accordance with the
regulations applicable to the sale of consumer goods in the country in which
you made this purchase.
For any information regarding this legal warranty, please contact your dealer.
Without prejudice to the legal guarantee of the products, ATLINKS guarantees
that the product in this box conforms to its technical specifications contained
in the user guide included in the this box, and this during a warranty period,
counted from the date of purchase of the new product, the date on your
invoice or ticket checkout where is indicated the name of your reseller, and
equal to: Twenty four (24) months for the telephone, (Thirty six (36) months
if the product was purchased in Spain or Portugal), excluding consumables,
accessories and batteries. For any claim under this warranty during the
warranty period, you must return the entire Product to your dealer, together
with the proof of purchase, the invoice or receipt issued by your dealer,
indicating the place of purchase and the serial number of the Product,
following the appearance or discovery of the defect.
ATLINKS undertakes to repair any defective item due to a defect in design,
material or workmanship, at its expense, or to replace, at its expense, by
an identical or at least equivalent element in terms of functionalities and
performance. If the repair or replacement is impossible under normal
commercial conditions, the Product will be refunded or replaced by a Product
equivalent. Within the maximum limit allowed by the applicable law, the
product or element replacement, which maybe new or reconditioned, is
warranted during a period of ninety (90) days from the date of repair or until
the end date of the initial warranty period, whichever is the earlier greater
than ninety (90) days, it being specified that any period of immobilization of
the Product of at least seven (7) days will be added to the warranty period
remaining to run. This warranty does not apply in the following cases:
- Installation or use not in accordance with the instructions in the guide of the
user,
- Incorrect connection or abnormal use of the Product, especially with
noncompatible accessories, as indicated in the user guide,
- Product opened, modified or replaced by means of non-approved parts,
serial number deleted, illegible, damaged,
- Normal wear, including normal wear and tear on accessories, batteries and
displays,
- Failure to comply with the technical and safety standards in force in the
area geographical use,
- Product having suffered a shock or a fall,
- Product damaged by lightning, electrical surge, heat source or radiation,
water damage, exposure to conditions of temperature, humidity or other
excessive ambient conditions or any other cause external to the product,
- Negligence or faulty maintenance,
- An intervention, a modification or a repair carried out by a not authorized by
ATLINKS.
If the returned Product is not covered by the warranty, you will receive a
quote from repair that will mention the cost of analysis and transportation
costs that you will be charged if you want the Product returned to you. This
guarantee is valid in the country in which you regularly purchased the
Product, provided that the country is a member of the European Union.
Subject to the legal provisions in force, all warranties other than described
herein are expressly excluded.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
A) THIS WARRANTY IS EXCLUSIVE TO ALL OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE PARTICULAR;
B) ATLINKS DISCLAIMS LIABILITY FOR LOSS OR DETERIORATION OF DATA,
LOSS OF USE LOST TO WIN, LOSS OF CHANCE, DEREVENUES OR INCOME,
LOSS OF OPERATION, DAMAGES INDIRECT, CONSEQUENTIAL,
CONSEQUENTIAL OR INCIDENTAL;
(C) ATLINKS LIABILITY IS LIMITED TO THE VALUE OF PURCHASE OF
PRODUCT EXCEPT HEAVIL OR UNINTENTIONAL FAULT AND EXCEPT DAMAGE
BODY
The Manufacturer reserves the right to modify the specifications of its
products in order to make technical improvements or comply with new
regulations.
In the event of an electrical hazard, the mains adapter acts as 230V power
isolating device. It should therefore, as a precaution, be installed close to the
appliance and beeasily accessible. To disconnect the device from the primary
power source, the mains adapter must be removed from the 230V AC/50 Hz
socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure,
telephones that use cordless handsets will not work.
You will then be unable to make or receive calls in the event of an emergency.
This is why we recommend that you also keep a conventional telephone –
one that doesn’t require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing in the
vicinity of the leak.
This symbol means that your inoperative electronic appliance must be
collected separately and not mixed with the household waste.
The European Union has implemented a specific collection and recycling
system for which producers are responsible.
This appliance has been designed and manufactured with high quality
materials and components that can be recycled and reused. Electrical and
electronic appliances are liable to contain parts that are necessary for the
system to work properly but which can become a health and environmental
hazard if they are not handled or disposed of in the proper way.
Consequently, please do not throw out your inoperative appliance with the
household waste.
If you are the owner of the appliance, you must deposit it at the appropriate
local collection point or leave it with the vendor when buying a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact your
service provider.
Keen to preserve the environment, ATLINKS has equipped this appliance with
a switching power supply, offering better energy efficiency. The advantages
include not only very low electricity consumption, but also a more compact
format than the conventional power supply units used by the previous range.
The used batteries from your telephone (if it has batteries) must be disposed
of in compliance with current environmental protection regulations. Comply
with your local regulations.
Return your batteries to your reseller or dispose of them at an approved
recycling centre.
Help us protect the environment in which we live!
Hereby, ATLINKS EUROPE declares that the radio equipment type DECT is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.alcatel-home.com
TECHNICAL DETAILS
Free Field Range Up to 300 meters*
Indoor Range Up to 50 meters*
Handset Battery Life
(average values)
18 hours talk time**
300 hours standby**
Number of Handsets Up to 4
Intercom Mode Yes
Yes
Electrical Connection/Base
Mains Adaptor/Charger
Three-Way Conference
(1 outside correspondent +
2 internal correspondents)
Base main adaptor & Charger adaptor:
Model No.: AT-536B-060045B or
1-CHEUA451-081
Input: 100-240 V/50-60 Hz/0.2 A
Output: 6 V
DC/450 mA, 2.7W
Only use the adaptors supplied with
telephone.
Single-phase AC, excluding IT install
defined by the EN62368-1 standard.
Caution: The network voltage is
classified as hazard by the criteria of this
standard.
Telephone Connection Appliance designed for connection to a
TNV3 class (telecommunications network
voltage) analogue telephone line as
defined by the EN62368-1 standard.
Batteries
Operating Temperature
* Values may vary according to environment.
** Depending on initial battery charge.
From 5
o
C to 40
o
C
2pcs of AAA NiMH batteries – 2.4 V –
300 mA
Only use the batteries supplied with the
telephone.
Use any other type of battery presents a
risk of explosion. Used batteries must be
disposed of in compliance with current
environmental protection regulations.
If you have difficulty with your phone, please try the suggestions listed
below.
As a general rule, if a problem occurs, remove the batteries from all the
handsets in your installation for about 1 minute, then disconnect and
reconnect the power supply to the base and reinstall the handset batteries.
TROUBLESHOOTING
The unit does not
record new
messages.
The answering
machine is turned
off.
Message memory
is full.
Turn on the answering
machine.
Erase unnecessary
messages.
a.
b.
a.
b.
The caller cannot
leave a message.
The answering
machine is turned
off.
Message memory
is full.
Turn on the answering
machine.
Erase unnecessary
messages.
a.
b.
a.
b.
I cannot operate
the answering
machine remotely.
You are entering
the wrong remote
access code.
You are pressing
the dial keys too
quickly.
The answering
machine is turned
off.
If you forget the
remote access code,
reset to the default
settings.
Press each key firmly.
Turn on the
answering machine.
a.
b.
c.
a.
b.
c.
Answering Machine
No dialing tone
when pressing
key
The connection cord
of the base station
is not plugged in.
The adapter cord is
not plugged in
correctly in the base
station.
The line is busy, as
another handset is
used.
a.
b.
c.
Check the
connections. Unplug
and plug back in the
mains. Check that the
telephone line cord
has been plugged into
the base station and
the phone socket.
Check the base
station plug and the
AC plug (remove and
plug-in).
Wait until the line is
unoccupied.
a.
b.
c.
“OUT OF RANGE”
is displayed.
Base station out of
range.
Base station not
connected to
mains.
a.
b.
Reduce the range.
Connect base station
to mains.
a.
b.
The call does not
work.
Service not activated
or wrong operator.
Check your Subscription
with network.
Problem Cause Solutions
Problem Cause Solutions
No display. Empty batteries. Recharge batteries.
While recording
an outgoing
message or
listening to
messages,
the unit rings and
recording stops.
A call is being
received.
Answer the incoming call
and try again to record
your outgoing message
later.
GUARANTEE
SAFETY
ENVIRONMENT
CONFORMITY
It is recommended that you avoid using this device during electrical storms.
Do not attempt to open the batteries, as they contain chemical substances.
In the event of leakage, avoid contact with the skin, eyes, nose and mouth.
In the event of contact, rinse the affected part for about twenty minutes with
running water and seek urgent medical attention. Clean the product with
absorbent paper or a dry cloth and contact your reseller for replacement
batteries.
ATLINKS hereby declares that the following models conform to the essential
requirements and other applicable provisions of European directive
1999/5/EC.
Hereby, ATLINKS EUROPE declares that the radio equipment type
DECT is in compliance with Legislation : Radio Equipment Regulations
2017 (SI 2017/1206). The full text of the UKCA declaration of conformity
is available at the following internet address:
www.alcatel-home.com
Average power per channel: 10mW
Maximum Output Power (NTP) : 24dBm
Frequency Range : 1880-1900MHz
28 Boulevard Belle Rive
92500 RUEIL-MALMAISON - France
RCS Nanterre 508 823 747
ATLINKS UK Ltd
3rd Floor, Waverley House
7-12 Noel Street, London, W1F 8GQ - UK
Company registration: 13809295
ATLINKS Europe
www.alcatel-home.com
The Manufacturer reserves the right to modify the specifications of its products
in order to make technical improvements or comply with new regulations.
ATLINKS 2022 - Reproduction prohibited.
Alcatel is a trademark of Nokia, used under license by ATLINKS