User guides

Making and receiving calls
Make and end a call
Press either before or after enter a phone number.
Press to end the call.
Answer a call
Press to answer a call. For handsfree conversation, press another time .
Incoming speech volume
Press or to increase or decrease the volume of your caller’s voice.
View or dial a number in Calls list*
F860 can store up to 50 reveived call details.
To access this list, press and hold to open the calls list, press or to select an entry,
press to dial the number.
Or press to access call details, store the number in phonebook or call block list, delete.
Phonebook
Store entry in phonebook (up to 100)
In idle mode, press , or to select Phonebook.
Press twice to select ADD, enter name of contact and press .
Enter number of contact and press , press again to save as VIP or to save as
contact, select the melody and validate .
To register the direct memories in keys M1, M2, 1, 2 & 3
/ or select HS Settings / / or select DIRECT MEM / /
or select or , , or / / edit or enter the number/ .
Call from the phonebook
Press OR press and or to select Phonebook then to access
phonebook.
Press / to select the desired entry.
Press to dial out the desired entry number.
Call direct memories
To dial out : Press or . / Press and hold , or .
Handset ringer settings
1. Press and or to select HS Settings.
2. Press and or to select Ring Setup.
3. Press and or to select Ring Volume.
4. Press and or to select the desired ringer volume.
There are 6 ringer volume levels including O.
5. Press and or to conrm.
Handset paging / Registration
Paging (Handset search)
Short press on (Fig.D) located under the base.
The handset will ring for 60 seconds. Press any keypad key on handset to stop ringing.
Handset registration
For multi-handset models, all handsets supplied are already associated with the base station.
Pairing is only necessary if you purchase an Alcatel F860 Extra Handset (4 handsets max. per
base) or when replacing a defective handset.
Press and hold for about 8 seconds.
On F860 extra handset, Press .
PIN? will display (if not, select REGISTRATION with or )
Enter the default PIN: 0000 (can be modied in BS settings menu )
Press .
Call Block
This telephone is built-in with Smart Call Block feature*. This feature will help you avoid nuisance calls
by only allowing some numbers to make your phone ring. Default setting Smart Call Block in this tele-
phone if OFF but you can enable it via your phone settings
*This feature requires a subcription of Caller Line Identication service from your network service
provider. Charges may apply.
Setting Expectation
OFF
Call Block function (Block all call with numbers) is Disabled.
This is the default mode.
ON
Call Block function is set to Manual. Numbers registered in the black list will not
go through and the phone will ring silently.
Numbers can be added to the list while the phone is ringing and / or after a call
(to enable, see part 1).
CONTACTS
In this automatic mode, any number not registered to your phonebook will be
automatically be blocked and not cause your phone to ring. All calls from contacts
registered to your phonebook will proceed normally. When this mode is chosen,
Contacts OK is displayed on LCD in idle mode unless you have unread messages.
VIPS
In this second automatic mode, only calls from contacts registered as VIP in your
phonebook will go through and cause you phone to ring. Any other number will
not ring.When this nide is chosen, VIPS OK is displayed on the LCD in idle mode
unless you have unread messages / missed calls (to enable, see part 2.2)
1. Manual call block mode
Manual call block is the easiest option when starting out. When you chose ON in the call block settings, all calling
numbers registered in your blacklist will be blocked. You can add/remove numbers from that list at any time.
How to block an incoming call:
When the phone is ringing and before answering, press will terminate the call and oer you the option to
register the number to the blacklist in one click.
Then to conrm the registration of this number in the blacklist, press .
IMPORTANT: if you don’t conrm, the number will not be added to the blacklist and the next call will
go through normally.
1.1. Enable MANUAL mode
Press , press or to select Call Block.
Press , press or to select Block set.
Press and press or to select ON (manual mode)
OR
In idle mode, press to access BLOCK SET. directly.
After you enable this option, the call block icon will be displayed on the LCD.
1.2. Add numbers to Blacklist
In Idle mode,
Press key, BLOCK SET. is displayed, or Press to press or to select CALL
BLOCK, press to show BLOCK SET.
Press or to select BLOCKLIST.
Press , press or to select ADD, enter number to be blocked, press to save.
NOTE: 2 more ways to add incoming and outgoing call numbers in Block list:
From incoming call numbers
Press , press or to select CALL LIST or press and hold .
Fig.D
Handset & Display description
Indicates that an external
call is connected or held.
Icon blinks when receiving
an incoming call.
The Call Blocking
function is activated.
(Refer to the Call Blocking part)
Indicates you have a
new missed calls*.
Indicates quality of
reception’s signal.
Displays when ringer volume
is turned o.
Displays when the alarm clock
is activated.
Enter the main menu,
access sub menus and
conrm options.
Press to make a call
During a call: Press to
activate/deactivate the
speaker mode.
Scroll down the menu items
Decrease volume.
Press M1 or M2 to dial
pre-recorded number
stored in direct memory.
Press and hold to
access the redial list.
Press and hold to
insert a Flash (R).
Displays when handsfree
is activated.
Indicates battery is full
charges.
Press to end a call.
Long press to exit from menu.
Indicates you have a
new voice mail message*.
Return to previous menu
Intercommunication
between two handsets.
Press to access the Phonebook.
Scroll up the menu items.
Increase volume.
Direct access to the
Call Block menu.
Press and hold to access the
call list.
Press , press or to select call list entry.
Press , press or to select to ADD to BLIST.
Press to show selected number, press to save to Block list.
From outgoing call numbers
Press and hold , press or to select redial list entry.
Press , press or to select to ADD to BLIST.
Press to show selected number, press to save to Block list.
1.3. Edit numbers in Blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select EDIT,
press or to select number to be edited, press to edit, and then press to save.
1.4. Delete numbers in Blacklist
1.4.1. Delete a number from blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select DELETE, press or to select number to
be deleted, press .
1.4.2. Delete all numbers from blacklist
In idle mode,
1. Repeat step 1 and 2 in Section 1.2.
2. Press , press or to select DELETE ALL, press , CONFIRM? is shown,
and then press to conrm.
2. Automatic call block mode
2.1. VIPs only
In this restrictive automatic mode, only calls from numbers registered as VIP in your phonebook
will go through and make your phone ring.
Press , press or to select Call Block.
Press , press or to select Block set.
Press , press or to select VIP OK (Automatic mode).
2.2. Contacts only
In this broad automatic mode, only calls from contacts registered in your phonebook (normal and
VIP) will go through and make your phone ring.
Press , press or to select Call Block.
Press , press or to select Block set.
Press , press or to select Contacts OK (Automatic mode).
*Subject to subscription and
availability of the service from the
xed line operator.