User guide

Configuring Network Time Protocol (NTP) Verifying NTP Configuration
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 3-11
Verifying NTP Configuration
To display information about the NTP client, use the show commands listed in the following table:
For more information about the resulting displays form these commands, see chapter “NTP Commands”
chapter in the OmniSwitch CLI Reference Guide.
Examples of the show ntp client, show ntp server stats, and show ntp server-list command outputs are
given in the section “NTP Quick Steps” on page 3-3.
show ntp client Displays information about the current client NTP configuration.
show ntp server status Displays the basic server information for a specific NTP server or a list
of NTP servers.
show ntp client server-list Displays a list of the servers with which the NTP client synchronizes.
show ntp keys Displays information about all authentication keys.