User guide

Managing System Files Application Examples for File Management
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 2-29
6 To verify that the Fadvrout.img file is in the /flash/working directory on the switch. Log onto the
switch and list the files in the /flash/working directory.
-> ls /flash/working
Listing Directory /flash/working:
drw 2048 Feb 4 10:45 ./
drw 2048 Feb 5 14:05 ../
-rw 670979 Feb 5 14:44 Fadvrout.img
-rw 2877570 Feb 4 10:33 Fbase.img
-rw 217119 Feb 4 10:33 Fdiag.img
-rw 727663 Feb 4 10:33 Feni.img
-rw 184312 Feb 4 10:33 Fenisym
-rw 236713 Feb 4 10:34 Fqos.img
-rw 5519 Feb 4 10:34 Frelease.img
-rw 467850 Feb 4 10:34 Frout.img
-rw 880 Jan 31 13:05 boot.cfg
This list verifies that the file is located on the switch in the /flash/working directory.
7 Execute the install command to register the advanced routing file Fadvrout.img. The following will
display:
-> install Fadvrout.img
renaming file temp.img -> /flash/working/Frelease.img
Installation of Fadvrout.img was successful.
The features and services supported by the Fadvrout.img image file are now available on the switch.
FTP Client Application Example
The following example shows how to transfer a file named rrtext.txt from the switch’s /flash/working
directory to another host using the switch as an FTP client.
1 Log into the switch. Use the ls command to verify that your current directory is /flash.
-> ls
Listing Directory /flash:
-rw 272 Nov 12 15:57 boot.params
drw 2048 Nov 12 17:52 certified/
drw 2048 Nov 3 12:32 working/
drw 2048 Oct 2 16:22 switch/
-rw 10000 Nov 12 15:58 swlog1.log
-rw 10000 Nov 12 17:50 swlog2.log
-rw 445 Nov 1 11:43 aaasnap
-rw 7298 Oct 24 16:51 websnap1024
-rw 2662306 Nov 8 16:44 cs_system.pmd
-rw 543 Nov 1 12:02 aaapublic
drw 2048 Nov 12 17:50 newdir/
-rw 1452 Nov 7 12:50 nssnap76
-rw 1452 Nov 7 12:42 iesnap76
16480256 bytes free