User guide

Using SNMP SNMP Overview
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 10-23
55 alaStackMgrClearedSlotTrap alaStack-
MgrSlotNI-
Number
chassis The element identified by
alaStackMgrSlotNINumber will
enter the pass through mode
because its operational slot was
cleared with immediate effect.
alaStackMgrSlotNINumber—Numbers allocated for the stack NIs as follows:
- 0: invalid slot number
- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable
- 1001..1008: switches operating in pass through mode
- 255: unassigned slot number.
Note: This trap is not supported on OmniSwitch 7700/7800/8800 switches.
56 alaStackMgrOutOfSlotsTrap N/A chassis One element of the stack will
enter the pass through mode
because there are no slot num-
bers available to be assigned to
this element.
Note: This trap is not supported on OmniSwitch 7700/7800/8800 switches.
57 alaStackMgrOutOfTokensTrap alaStack-
MgrSlotNI-
Number
chassis The element identified by
alaStackMgrSlotNINumber will
enter the pass through mode
because there are no tokens
available to be assigned to this
element.
alaStackMgrSlotNINumber—Numbers allocated for the stack NIs as follows:
- 0: invalid slot number
- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable
- 1001..1008: switches operating in pass through mode
- 255: unassigned slot number.
Note: This trap is not supported on OmniSwitch 7700/7800/8800 switches.
58 alaStackMgrOutOfPassThroughSlot-
sTrap
N/A chassis There are no pass through slots
available to be assigned to an ele-
ment that is supposed to enter the
pass through mode.
Note: This trap is not supported on OmniSwitch 7700/7800/8800 switches.
No. Trap Name Objects Family Description