User guide

Using SNMP SNMP Overview
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 10-17
27 stpRootPortChange vStpNumber
vStpRootPort-
Number
stp A root port has changed for a
spanning tree bridge. The root
port is the port that offers the
lowest cost path from this bridge
to the root bridge.
vStpNumber—The Spanning Tree number identifying this instance.
vStpRootPortNumber—The port ifindex of the port which offers the lowest cost path from this bridge to the
root bridge for this spanning tree instance.
28 mirrorConfigError mirmonPrima-
rySlot
mirmonPrima-
ryPort
mirroringSlot
mirroringPort
mirMonErrorNi
mirMonError
pmm The mirroring configuration
failed on an NI. This trap is sent
when any NI fails to configure
mirroring. Due to this error, port
mirroring session will be termi-
nated.
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
mirroringSlot—Slot of mirroring interface.
mirroringPort—Port of mirroring interface.
mirMonErrorNi—The NI slot number.
mirMonError—The Error returned by the NI which failed to configure Mirroring/Monitoring.
29 mirrorUnlikeNi mirmonPrima-
rySlot
mirmonPrima-
ryPort
mirroringSlot
mirroringPort
mirMonErrorNi
pmm The mirroring configuration is
deleted due to the swapping of
different NI board type. The Port
Mirroring session which was
active on a slot cannot continue
with the insertion of different NI
type in the same slot.
mirmonPrimarySlot—Slot of mirrored or monitored interface.
mirmonPrimaryPort—Port of mirrored or monitored interface.
mirroringSlot—Slot of mirroring interface.
mirroringPort—Port of mirroring interface.
mirMonErrorNi—The NI slot number.
mirMonError—The Error returned by the NI which failed to configure Mirroring/Monitoring.
30 slPesudoCAMStatusTrap slPCAMSlot-
Number
slPCAMSlice-
Number
slPCAMStatus
bridge The trap status of the Layer 2
pesudoCAM for this NI.
slPCAMSlotNumber—The slot number of this Coronado switching/routing ASIC.
slPCAMSliceNumber—The slice number of this Coronado switching/routing ASIC.
slPCAMStatus—The Layer 2 pesudoCAM status of this Coronado switching/routing ASIC.
31 alarmActiveState N/A none An alarm from a hardware alarm
panel has been raised.
Note: This trap is not supported in the current release.
32 alarmClearState N/A none An alarm from a hardware alarm
panel has been cleared.
Note: This trap is not supported in the current release.
No. Trap Name Objects Family Description