User guide

Using WebView Configuring the Switch With WebView
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 9-11
2 Complete the fields, then click Apply. The new configuration takes effect immediately and the new
entry appears in the table.
3 Repeat steps 1 and 2 to add additional entries.
Modifying an Existing Entry
To modify an existing entry:
1 Click on the checkbox to the left of the entry on the Configuration page and click Modify. The Modify
window appears (e.g., Modify IP Static Route). The current configuration is displayed in each field.
Add Window