User guide

Using WebView WebView CLI Commands
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 9-3
WebView CLI Commands
The following WebView configuration options are typically managed through the CLI. However, enabling
WebView and enabling SSL may also be set up through WebView itself.
Enabling/Disabling WebView
WebView is enabled on the switch by default. If necessary, use the http server command to enable
WebView. For example:
-> http server
Use the no http server command to disable WebView on the switch. If web management is disabled, you
will not be able to access the switch using WebView. Use the show http command to view WebView
status.
Enabling/Disabling SSL
Force SSL is disabled by default. Use the http ssl command to enable Force SSL on the switch. For exam-
ple:
-> http ssl
Use the no form of the http ssl command to disable Force SSL on the switch. Use the show http
command to view WebView status.