User guide

Quick Steps for Setting Up ASA Managing Switch Security
page 8-8 OmniSwitch 7700/7800/8800 Switch Management Guide April 2006
Logging facility. For more information about Switch Logging, see the OmniSwitch 7700/7800/8800
Network Configuration Guide.
Note. To verify the switch access setup, enter the show aaa authentication command. The display is
similar to the one shown here:
Service type = Default
1rst authentication server = rad1
2nd authentication server = local
Service type = Console
Authentication = Use Default ,
1rst authentication server = rad1
2nd authentication server = local
Service type = Telnet
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Ftp
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Http
Authentication = denied
Service type = Snmp
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
Service type = Ssh
Authentication = Use Default,
1rst authentication server = rad1
2nd authentication server = local
For more information about this command, see the OmniSwitch CLI Reference Guide.