User guide

Using the CLI Application Example
OmniSwitch 7700/7800/8800 Switch Management Guide April 2006 page 5-23
4 Press the spacebar <sp> key to execute the filter option. The following will display.
Enter filter pattern: *vlan*
8193 dot1qBase vlan
8194 dot1qVlan vlan
8195 dot1qVlanCurrentTable vlan
8196 dot1qVlanStaticTable vlan
8197 vlanMgrVlanSet vlan
8198 vlanTable vlan
8199 vpaTable vlan
9217 vCustomRuleTable vlan
9218 vDhcpGenericRuleTable vlan
9219 vDhcpMacRuleTable vlan
More? [next screen <sp>*, next line <cr>*, filter pattern </>*, quit <q>]
The screen displays 10 table rows, each of which contain the text pattern “vlan”. (The screen rows shown
above and below the table are not counted as part of the 10 rows.) If you want to display the rows one line
at a time, press Enter instead of the space bar key. To exit the table, type the “q” character and the CLI
will exit the more mode and return you to the system prompt.