User guide

Managing the Directory Structure of the CMM (Non-Redundant) Managing CMM Directory Content
page 4-18 OmniSwitch 7700/7800/8800 Switch Management Guide April 2006
Show Switch Files
The files currently installed on a switch can be viewed using the show microcode command. This
command displays the files currently in the specified directory.
To display files, enter the command with a directory, as shown:
-> show microcode certified
Package Release Size Description
-----------------+---------------+--------+-----------------------------------
Fadvrout.img 5.4.1.231.R01 987442 Alcatel Advanced Routing
Fbase.img 5.4.1.231.R01 4361865 Alcatel Base Software
Fdiag.img 5.4.1.231.R01 331499 Alcatel Diagnostics Archive
Feni.img 5.4.1.231.R01 1319483 Alcatel NI Software
Fl2eth.img 5.4.1.231.R01 990701 Alcatel Layer 2, Ethernet
Fos.img 5.4.1.231.R01 1498479 Alcatel Operating System
Fqos.img 5.4.1.231.R01 314177 Alcatel Quality of Service
Frout.img 5.4.1.231.R01 769574 Alcatel Routing
Fsecu.img 5.4.1.231.R01 129799 Alcatel Security
Fweb.img 5.4.1.231.R01 1472785 Alcatel Webview - Main
Fwebadvrout.img 5.4.1.231.R01 251953 Alcatel Webview - Advanced Routing
Fwebl2eth.img 5.4.1.231.R01 330891 Alcatel Webview - Layer 2 and Ethern
Fwebqos.img 5.4.1.231.R01 263724 Alcatel Webview - Quality of Service
Fwebrout.img 5.4.1.231.R01 350642 Alcatel Webview – Routing
Fwebsecu.img 5.4.1.231.R01 212664 Alcatel Webview – Security
If no directory is specified, the files that have been loaded into the running configuration are shown.
To display the date when the archive was last updated, enter the show microcode command with the
history keyword, as shown:
-> show microcode history
Archive Created 1/1/06 6:49:34