User guide

Standards Compliance Regulatory Compliance and Safety Information
page A-2 OmniSwitch 7700/7800 Hardware Users Guide April 2005
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards:
Safety Standards
• UL 60950
• CAN/CSA-C22.2 No. 60950-00
• EN 60950
• IEC 60950
• TS 001
• AS/NZS 3260
• CB Certification PBR IEC 950
EMC Standards
• FCC Part 15 (CFR 47) Class A/Class B
• ICES-003 Class A/Class B
• EN 55022 Class A/Class B
• CISPR 22 Class A/Class B
• AS/NZS 3548 Class A/Class B
• VCCI Class A/Class B
• EN 55024
• EN 50082-1
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-4
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-8
• ENC 1000-4-11
Safety and Environmental Standards
• ETS 300 019 Storage Class 1.1
• ETS 300 019 Transportation Class 2.3
• ETS 300 019 Stationary Use Class 3.1
All hardware switching modules used in an OmniSwitch 7700/7800 comply with Class A and Class B
standards for digital devices per the FCC Part 15, ICES-003, EN 55022, CISPR 22, AS/NZS 3548, and
VCCI standards. Modules with copper connectors meet Class A requirements using unshielded (UTP)
cables, but meet Class B requirements using shielded (STP) cables.