User guide

Removing and Adding Modules Network Interface (NI) Modules
page 5-28 OmniSwitch 7700/7800 Hardware Users Guide April 2005
4 Once the module is firmly seated, secure the module to the chassis by tightening the two captive
screws. Be sure not to overtighten the captive screws. If you use a screwdriver, the torque used to tighten
the screws must not exceed 2.3 inch pounds.
OS7-ENI-C24
1x 3x 5x
OK1
OK2
8x6x4x
OS7-ENI-C24
1x
3x
OK1
OK2
6
4x
1
2
NI