User guide

Network Interface (NI) Modules ENI Modules
OmniSwitch 7700/7800 Hardware Users Guide April 2005 page 5-3
OS7-ENI-C24/OS7-ENI2-C24 Front Panel
OS7-ENI-C24 Front Panel
OS7-ENI-C24
1x 3x 5x 7x 9x 11x 13x 15x 17x 19x 21x 23x
OK1
OK2
22x20x18x16x14x12x10x8x6x4x
Module Status LEDs
OK1. Hardware Status. Displays solid
green when powered on and the ENI has
passed hardware diagnostic tests. Displays
solid amber when powered on and the ENI
has failed hardware diagnostic tests.
OK2. Software Status. Blinks green when
the ENI is operational and has successfully
loaded software. Displays solid amber
when powered on and the ENI has failed to
load software.
Ethernet Port LEDs
Each Ethernet port has a built-in corre-
sponding LED. This LED indicates the link
and activity status for each Ethernet port.
The LED displays green when a valid
Ethernet cable connection exists. Flashes
green as data is transmitted or received on
the port.
Refer to the illustration below for LED
locations.
Ethernet Ports
The OS7-ENI-C24 and OS7-ENI2-C24
modules provide 24 Ethernet ports.
These ports are twisted-pair and are
individually configurable as 10BaseT
or 100BaseTX. The ports use RJ-45
connectors.
Refer to the Technical Specifications
table on page 5-4 for more information.
Module
Status
LEDs
Ethernet Port
LED Location
Module Label
The label on the front panel identifies
the module type: either OS7-ENI-C24
or OS7-ENI2-C24.