Technical data

IPX Configuration 79
The following table shows some common service types and their values:
Configuring the Maximum Length of the Service Information
Reserve-Queue for One Service Type
IPX supports up to 10240 service
entries with 5120 service types and 5120 static service entries at most. You can
configure the maximum service entries for one service type.
Perform the following configuration in system view.
By default, the maximum length of the service information reserve-queue for one
service type is 2048.
If the length of the service information reserve-queue that you configure is less
than the original one, the current service entries are not deleted. And if the
number of the service entries of the same type reaches the specified value, new
service information is not added.
Configuring IPX Forwarding
Use the information in the following sections to configure IPX forwarding.
■ Configuring Triggered Update in IPX
■ Configuring Split Horizon of IPX
■ Configuring the Encapsulation Format of the IPX frame
■ Configuring for Forwarding Type 20 IPX Broadcast Packets
Configuring Triggered Update in IPX IPX RIP and SAP periodically broadcast
update. If the periodical broadcast is not desired, you can enable triggered update
Table 34 Service Types and Their Values
Service Type Value
Unknown 0000h
Print Queue 0003h
File Server 0004h
Job Server 0005h
Print Server 0007h
Archive Server 0009h
Remote Bridge Server 0024h
Advertising Print Server 0047h
Reserved Up To 8000h
Wildcard FFFFh (-1)
Table 35 Configuring the Maximum Length of the Service Information
Reserve-Queue for one Service Type
Operation Command
Configure the maximum length of the service
information reserve-queue for one service
type
ipx sap max-reserve-servers length
Restore the default maximum length of the
service information reserve-queue for one
service type
undo ipx sap max-reserve-servers