Technical data

RMON 355
Use the following commands to add or delete an entry to or from the history
control table.
Perform the following configuration in Ethernet port view.
Adding and Deleting an Entry to or from the Extended RMON Alarm Table
You can use the command to add or delete an entry to or from the extended
RMON alarm table.
Perform the following configuration in system view.
Adding and Deleting an Entry to or from the Statistics Table
The RMON statistics management concerns port usage monitoring and error
statistics when using the ports. The statistics include collision, CRC and queuing,
undersize packets or oversize packets, timeout transmission, fragments,
broadcast, multicast and unicast messages, and the usage ratio of bandwidth.
Use the following commands to add or delete an entry to or from the statistics
table.
Perform the following configuration in Ethernet port view.
Table 61 Adding or Deleting an Entry to or from the History Control Table
Operation Command
Add an entry to the history control table rmon history entry-number buckets number
interval sampling-interval [ owner text-string
]
Delete an entry from the history control table undo rmon history entry-number
Table 62 Add or Delete an Entry to or from the Extended RMON AlarmTable
Operation Command
Add an entry to the extended RMON alarm
table
rmon prialarm entry-number alarm-var [
alarm-des ] sampling-timer { delta | absolute
| changeratio } rising-threshold
threshold-value1 event-entry1
falling-threshold threshold-value2
event-entry2 entrytype { forever | cycle
cycle-period } [ owner text ]
Delete an entry from the extended RMON
alarm table
undo rmon prialarm entry-number
Table 63 Add or Delete an Entry to or from the Statistics Table
Operation Command
Add an entry to the statistics table rmon statistics entry-number [ owner
text-string ]
Delete an entry from the statistics table undo rmon statistics entry-number