User guide

49 50
Security11.3
SIM
Activate PIN The SIM card protection code is requested each
time the phone is powered on if this code is
activated.
Change PIN Change PIN code.
Change PIN2 A protection code for certain SIM card features
(Billing/Cost/FDN, etc.) will be requested if you
attempt to access it, if the code is activated.
Select to update it with a new one (between 4
and 8 digits).
Fixed dial number Allows the phone to be "locked" so that it can
only dial certain numbers, or numbers with
certain prefixes. To activate this function, PIN2
code is mandatory.
Phone
Activate password Code is requested each time the phone is
powered on.
Change password Change phone password, its initial one is 1234.
Network11.4
Network selection
Preferred network List of networks to which you wish to be
connected in order of priority.
Select network The choice of network connection is left up to
the user.
Search mode Network connection can be switched between
"Manual" and "Auto".
GPRS connection
(1)
When needed GPRS mode active depending on connection
requirements.
Always GPRS mode continuously active.
GPRS international roaming
GPRS data services can be used while roaming overseas.
Connectivity11.5
A set of profile settings for messaging (MMS) and WAP connection.
Restore default11.6
Make all settings recover as default value. End-user data will not be erased.
Enter its default password 1234 to confirm to restore and reboot.
Dual 11.7 SIM settings
(2)
Dual SIM activated Keep both of your SIM cards active
Only SIM1 activated Only keep SIM1 active
Only SIM2 activated Only keep SIM2 active
(1)
Depending on network availability.
(2)
2010D only.