Specifications

90
Tools and consumable products
Special precautions
Spare parts
Minor kit
Major kit
Front seal replacement kit
(parts for shaft passage tightness on
motor side)
Screw kit
Specific tools
Recommended tools
• Read the warning at the beginning of the maintenance chapter.
• Before disassembling the pump, drain it (see page 87).
• All the seals and faulty parts should be replaced, provide for a seal kit or
a maintenance kit.
This contains all the seals on the
pump which must be replaced at
each complete disassembly.
This kit contains all the parts which
must be replaced in the event of a
leak on the shaft on the motor side.
This kit contains all screws and
washers for all pump models.
Lip seal assembly mandrel.
• Two 5.5 x 100 flat screwdrivers
• Thin spanner: 10 mm on face
• Allen wrenches: 2.5 - 3 - 4 - 5 mm
• 12 mm box wrench
12
5
3
2,5
10
Pump models Part No.
SD 103911
I / C1 / C2 103912
Pump models Part No.
2005 SD 103902
2010 SD 103903
2015 SD 103904
2021 SD 103905
2005 I 103906
2010 I 103907
2015 I 103908
2021 I 103909
2005 C1 104976
2010 C1 104977
2015 C1 104978
2021 C1 104979
Pump models Part No.
SD 065875
I /C1 / C2 065612
Pump models Part No.
All models 052993
Screw kit Part No.
All pumps 104919
Keep this kit in a dry place, away from heat and light (sunlight and ultraviolet
light), in order to prevent any hardening of the elastomers (see AFNOR
standards: "storage conditions for vulcanized elastomer based products" -
FD T.46 022).
In addition to the seal kit, this kit contains a set of spare parts to perform
maintenance operations on the pump for a two year period, under normal
operating conditions.
Pump models Part No.
2010 C2 104614
2015 C2 104615
2021 C2 104616
1005 C1 104617
1010 C1 104618
1015 C1 104619
1021 C1 104620
1005 SD 104622
1010 SD 104623
1015 SD 104643
1021 SD 104644