Specifications

Presentation
55
5 to 21 m
3
/h rotary vane pumps.
I, SD, C1, C2 Pascal series
Four 5 to 21 m
3
/h pump models with
the following main characteristics:
- A direct drive motor, making them
very compact.
- An electrically insulated fold-away
handle is used for easy carrying.
- An anti-suckback system ensures
the tightness of the pump during
accidental or voluntary shutdowns.
- A gas ballast enables the pumping
of condensable vapours (except for
C2 series).
- The universal three-phase or single-
phase motor can be disassembled
independently of the rest of the
pump, without the need to drain
the oil case.
- On the oil case, a vertical sight
glass can be used to inspect the oil
level easily when filling the tank and
during the operation of the pump.
- A neutral gas purge is used to
degas oil and dilute pumped gases
on C2 series models.
The inlet and exhaust end fittings are PNEUROP ISO-KF standardized.
They are fitted vertically on the pump at delivery but can be positioned on
the horizontal openings if required by operating conditions.
They can also be used to connect many of our accessories (see page 63).
The main remplacement parts are interchangeable: This enables easier
disassembly-assembly operations and replacement without changing the
pump’s performance.
Various accessories can be used to adapt the pump to meet the requirements
of your application.
The moulded aluminium pump frame supports the pumping module and the
motor. All the parts of the pumping module in contact with gases are free of
zinc, copper and cadmium.
The other construction materials include cast iron, aluminium alloy, stainless
steel, fluorocarbons (FPM), nitril (NBR) and chemically resistant polymers.
1. Oil case
2. Gas ballast control
3. Base
4. Oil level sight glass
5. Filling plugs
6. Draining plug
7. Frame
8. Inlet end fitting
9. Exhaust end fitting
10. Fold-away handle
11. Electric motor
12. IEC electric socket
4
1
3
2
7
8
9
10
11
12
5
6