User guide

Class Family Possible family classes are as follows:
v 5620_SAM_AingrAengrQueue
v 5620_SAM_Aosqos_Policy
v 5620_SAM_BaseCard
v 5620_SAM_CardSlot
v 5620_SAM_CfmEthTest
v 5620_SAM_CfmOneWayDelay
v 5620_SAM_CfmTwoWayDelay
v 5620_SAM_CfmSingleEndedLoss
v 5620_SAM_Channel
v 5620_SAM_ControlProcessor
v 5620_SAM_DaughterCard
v 5620_SAM_DHCP6_Address
v 5620_SAM_DS1_E1
v 5620_SAM_Hw_Environment
v 5620_SAM_IMALink
v 5620_SAM_ISA_Mda
v 5620_SAM_ISA_Member
v 5620_SAM_LAGInterface
v 5620_SAM_MCMCard
v 5620_SAM_MME
v 5620_SAM_MPLSInterface
v 5620_SAM_MPLS_Site
v 5620_SAM_MSS
v 5620_SAM_NQueue
v 5620_SAM_OAM_Test
v 5620_SAM_PhysicalPort
v 5620_SAM_PPP_Interface
v 5620_SAM_PPP_Protocol
v 5620_SAM_S11Peer
v 5620_SAM_S1UPeer
v 5620_SAM_S5Peer
v 5620_SAM_S8Peer
v 5620_SAM_SdpBinding
v 5620_SAM_ServiceAccessInterface
v 5620_SAM_Shelf
v 5620_SAM_Subnet_Address
v 5620_SAM_Virtual_Router
Key value The value for key. The key is from the
relation lookup configuration. Most of these
keys are based on the IP address. The
objectFullName can also be used as a key.
Collector id Id for collector that is based on the UBA
destination.
Note: This configuration is intended for new elements from SAM that the
user wants to overwrite the default hash key rule. For example, a user can
force the element to go to a specific collector or UBA for better load
Chapter 10. Modifying the collection strategy 65