User guide

Similarly, the service.ServiceIngressOctetsLogRecord class and the
service.ServiceIngressPacketsLogRecord class are mutually exclusive. You cannot
collect metrics for both classes at the same time.
The SAM server administrator uses the appropriate utility to configure polling
statistics for SAM statistics classes. To configure polling statistics for these SAM
statistics classes, enable the appropriate MIBs on the primary and redundant SAM
servers.
The default Tivoli Netcool Performance Manager collection period for all types of
SAM statistics is set to every 15 minutes, so the SAM server policies must be
configured to match this default value.
Note: The collection period for any type of SAM statistics must be set to the same
value as the collection period for the corresponding Tivoli Netcool Performance
Manager requests.
Enable the MIBs for the SAM statistics classes
SAM server administrator must enable all of the MIBs listed in the table for the
Alcatel-Lucent 5620 SAM LogToFile Technology Pack.
The first column of the table identifies the SAM statistics class on which to enable
polling statistics; the second column identifies the MIBs to enable for the SAM
statistics classes; and the third column identifies the object types to enable. The
SAM server administrator can enable more object types, but the Alcatel-Lucent
5620 SAM LogToFile Technology Pack expects at a minimum the ones that are
listed in the third column.
Table 2. MIBs to enable for SAM statistics classes
SAM statistics class MIB Object types
equipment.AllocatedMemoryStatsLogRecord TIMETRA-SYSTEMMIB sgiMemoryPoolAllocated
equipment.AvailableMemoryStatsLogRecord TIMETRA-SYSTEMMIB sgiMemoryAvailable
equipment.InterfaceAdditionalStatsLogRecord IF-MIB ifXEntry
equipment.InterfaceStatsLogRecord IF-MIB (in the file
named rfc2233-
IF-MIB)
ifEntry
equipment.MediaIndependentStatsLogRecord HC-RMON-MIB mediaIndependentEntry
equipment.SystemCpuStatsLogRecord TIMETRA-SYSTEMMIB sgiCpuUsage
equipment.SystemMemoryStatsLogRecord TIMETRA-SYSTEMMIB sgiMemoryUsed
mpls.MplsInterfaceStatsLogRecord TIMETRA-MPLS-MIB vRtrMplsIfStatEntry
ppp.PppStatsLogRecord and
ppp.PppControlProtocol
TIMETRA-PPP-MIB tmnxPppEntry
svt.SdpBindingBaseStatsLogRecord TIMETRA-SERV-MIB sdpBindBaseStatsEntry
ethernetequipment.Dot3StatsLogRecord EtherLike-MIB dot3StatsEntry
mpls.SiteStatsLogRecord TIMETRA-MPLS-MIB vRtrMplsGeneralStatEntry
service.PppoeSapStatsLogRecord TIMETRA-PPPOEMIB tmnxPppoeSapStatsEntry
svq.CustMultiSvcSiteIngSchedPlcyPortStatsLog
Record
TIMETRA-SERV-MIB custMultiSvcSiteIngSchedPlcyPortStats
Entry
svq.CustMultiSvcSiteEgrSchedPlcyPortStatsLog
Record
TIMETRA-SERV-MIB custMultiSvcSiteEgrSchedPlcyPortStats
Entry
Chapter 9. Setting up the Alcatel-Lucent 5620 SAM servers to support LogToFile 59