User guide

Chapter 8. Upgrading the technology pack

Describes how to upgrade Alcatel-Lucent 5620 SAM 2.14.0.0 Technology Pack and

Alcatel-Lucent 5620 SAM LogToFile 2.2.0.0 Technology Pack to Alcatel-Lucent 5620

SAM LogToFile 2.3.0.0 Technology Pack.

Upgrading the Alcatel-Lucent 5620 SAM 2.14.0.0 Technology Pack to

Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0

You can upgrade the Alcatel-Lucent 5620 SAM 2.14.0.0 Technology Pack to

Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0.

About this task

To upgrade the Alcatel-Lucent 5620 SAM 2.14.0.0 Technology Pack to

Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0:

Procedure

1. Stop the DataChannel:

a. Start a terminal emulator on the DataChannel server

b. Run the dccmd command to stop all the DataChannel applications:

$ dccmd stop all

c. Run the dccmd command to release all daemons that are running in the

DataChannel:

$ dccmd forget all

d. Run the following command to find the process identifiers (pids) that are

associated with the DataChannel visual processes:

$ findvisual

e. Run the following commands to stop each DataChannel visual process:

$ kill -9 <cnsw_pid>

$ kill -9 <logw_pid>

$ kill -9 <amgrw_pid>

$ kill -9 <cmgrw_pid>

2. Start the Topology Editor, and delete the Performance and Accounting UBAs:

a. Open the Topology Editor, and click Topology > Open existing topology

to load existing topology from database.

b. In the Logical View, select the UBA collector, right click and Remove

Collector channels.

c. Repeat for the same step for all existing UBA collectors in system.

d. Click Topology > Save Topology.

e. Click Run > Run Deployer for Uninstallation to deploy the topology that

you configured.

3. Run the following commands to remove the files:

v /opt/proviso/datachannel/bin

rm –rf *_visual

v /opt/proviso/datachannel/state

rm –rf *pid

rm -rf *_visual