User guide

Chapter 6. Installing the Alcatel-Lucent 5620 SAM LogToFile

2.3.0.0 Technology Pack

The Topology Editor was introduced at the same time as the 4.3-U technology pack

release. All 4.3-U or higher UBA technology pack installations require the Topology

Editor to configure the technology pack.

Configuration details are described in the Pack Installation and Configuration Guide.

You can install the Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0 Technology Pack

either from a launchpad or by using the command line.

Tivoli Netcool Performance Manager supports the 4.3-U or higher technology pack

installation procedures.

All technology packs, both legacy bundle and stand-alone packs, require the

Technology Pack Installer. Always use the latest Technology Pack Installer,

regardless of the version of the technology pack.

Important: A new Technology Pack Installer is released in 1.3-G release with the

version 3.3.1.0. This version has no feature enhancements but is released for license

text changes.

All technology packs require that the Starter Kit or the Pack Bundle Prerequisite

Pack to be installed.

Prerequisite software

Ensure that you fulfill these prerequisites before you install and configure the

Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0 Technology Pack.

Prerequisite software for Alcatel-Lucent 5620 SAM LogToFile

2.3.0.0 Technology Pack installation

You must have all the prerequisite software and required information before you

install and configure a technology pack.

v IBM Tivoli Netcool Performance Manager 1.3.2. Additionally, you require the

1.3.2.0-TIV-TNPM-IF0019 fix pack.

Note: This fix pack contains the DataChannel fixes to support IBM InfoSphere

Information Server for Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0 Technology

Pack.

v Oracle 11g client 64 bit

v UBA collectors. You can add UBA collectors as described in Add a Collector in

Installing Tivoli Netcool Performance Manager - Wireline Component and associate it

with a UBA pack as part of this technology pack installation.

v Ensure that you have access to the Tivoli Netcool Performance Manager

DataMart server that is running an X Window System server.

Note: If there is no graphics card on the DataMart server, the Xvfb virtual frame

buffer package that provides X Window System services is automatically

installed. For more information, see Setting Up a Remote X Window Display in

Installing Tivoli Netcool Performance Manager - Wireline Component.