User guide

4. Click the Projects tab to list the Projects.
5. Select the project UDM, and then click Properties.
6. In the Project Properties window, click Environment. The Environment
Variables window opens.
7. Expand General and change the value for LD_LIBRARY_PATH variable to:
/usr/lib:.:/opt/IBM/InformationServer/Server/Projects/UDM/udm/lib
This is the path where the custom libraries are located.
8. Optional: Expand Parallel and change the value for APT_CONFIG_FILE variable
to other than default (/opt/IBM/InformationServer/Server/Configurations/
default.apt) with appropriate numbers of DataStage nodes that are required.
9. Click OK.
10. Click Close to save the new project and to exit the InfoSphere DataStage and
QualityStage Administrator.
Updating the operator.apt file
An extra configuration step.
Procedure
1. Go to the operator.apt file from this location:
/opt/IBM/InformationServer/Server/PXEngine/etc/operator.apt
2. Edit the operator.apt file to add the following lines:
CSVWriterOp libCSVWriterOperator 1
FeedbackOp libWaveOperator 1
ReceiverOp libWaveOperator 1
WindowOp libWindowOperator 1
PerlizeOp libPerlizeOperator 1
CombineOp libCombineOperator 1
AuditOp libAuditOperator 1
HousekeeperOp libHousekeeperOperator 1
XMLChunkerOp libXMLChunkerOperator 1
DeduplicateOp libDeduplicateOperator.so 1
These are the custom libraries that are specific to Alcatel-Lucent 5620 SAM
LogToFile 2.3.0.0 Technology Pack.
Importing an IBM InfoSphere DataStage job
You must import the SAM LogToFile job into the project. The project and its job
are created and then imported into the metadata repository by using IBM
®
InfoSphere
™
DataStage
®
and QualityStage
™
Designer.
Before you begin
Before you import the ds_job_v2.2.0.0.6.dsx that is available in the technology
pack JAR file, close all the existing jobs that are open in the Designer from the
previous JAR file. This is not required on a fresh installation.
Procedure
1. Log in to IBM InfoSphere DataStage and QualityStage Designer as dsadm and
password, and select your project from the Project list.
2. Transfer the ds_job_v2.2.0.0.6.dsx file from the DataStage Server machine
(/opt/IBM/InformationServer/Server/Projects/UDM/udm/jobs) to the designer
client machine.
Chapter 5. Deploying Alcatel-Lucent 5620 SAM LogToFile 2.3.0.0 DataStage jobs 27