Troubleshooting guide

3 — NE user and device security
3-26 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
4 Click on the CMPv2 tab and configure the required parameters.
5 To create a CMP key, perform the following steps.
i Click Create. The CMP Key List (Create) form opens.
ii Configure the parameters.
iii Click OK to save your changes and close the form.
6 Click Apply to save your changes.
7 Distribute the policy to NEs, as required.
8 Close the open forms.
Procedure 3-15 To perform CMPv2 actions
1 Choose Administration→Security→NE PKI Authentication→Site Public Key
Infrastructure from the 5620 SAM main menu. The Select Site form opens.
2 Choose an NE in the list and click OK. The Site Security Public Key Infrastructure
(Edit) form opens.
3 Click Admin Certificate and choose Perform CMPv2 Actions. The Admin Certificate
form opens.
4 Perform one of the following to configure the CA Profile Name parameter.
a Select a CA profile.
b Enter the profile name.
CMPv2 actions
5 Select a CMPv2 action from the drop-down menu beside the Type parameter in the
Action panel. Table 3-1 lists the available CMPv2 actions. You can view the status
of the last CMPv2 action performed on this site in the Last Action Status panel.
Table 3-1 CMPv2 actions
Note — A key that is created locally on an NE, for example, using a CLI,
is not sent to the 5620 SAM, and is displayed on the Certificate Authority
Profile form as N/A. Any N/A keys on an NE must be deleted before the
profile can be distributed to the NE.
Action See step
Initial Registration 6
Certificate Request 10
Key Update 14
(1 of 2)
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01