Troubleshooting guide

2 — 5620 SAM user security
Alcatel-Lucent 5620 Service Aware Manager 2-45
5620 SAM
System Administrator Guide
(value={USERNAME})
where
value is the LDAP attribute or context
vi Save your changes.
9 Close the Remote Authentication Manager (Edit) form.
Procedure 2-37 To change the 5620 SAM Task Manager settings
The Task Manager lets 5620 SAM operators monitor the progress of operational tasks.
Only 5620 SAM administrators can change task monitoring parameters.
1 Log in to the 5620 SAM main server station as the samadmin user.
2 Open a console window.
3 Navigate to the /opt/5620sam/server/nms/config directory.
4 Open the nms-server.xml file using a plain-text editor such as vi.
5 Find and configure the required parameters:
• maxNumRetainedTasks
• numTasksToPurgeWhenFull
• successfulTasksPurgeInterval
• failedTasksPurgeInterval
6 Save and close the nms-server.xml file.
7 Navigate to the /opt/5620sam/server/nms/bin directory.
8 Enter the following to restart the main server:
bash$ ./nmsserver.bash force_restart ↵
The main server restarts, and the configuration change takes effect.
Note — The Task Manager is operational with the default values.
Caution — Contact your Alcatel-Lucent technical support
representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that
can include service disruption.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01