Troubleshooting guide

2 — 5620 SAM user security
Alcatel-Lucent 5620 Service Aware Manager 2-43
5620 SAM
System Administrator Guide
2 Select a user group in the Default External User Group panel.
3 Save your changes and close the form.
Configure remote servers
4 Using an account with an assigned security scope of command role, choose
Administration→Security→5620 SAM Remote User Authentication from the
5620 SAM main menu. The Remote Authentication Manager (Edit) form opens.
5 Configure the parameters.
6 Configure one or more RADIUS authentication servers, as required.
i Click on the RADIUS tab and click Create. The SAM RADIUS Authentication
Server (Create) form opens.
ii Configure the required parameters.
iii Save your changes.
7 Configure one or more TACACS+ authentication servers, as required.
i Click on the TACACS tab and click Create. The SAM TACACS+ Authentication
Server (Create) form opens.
ii Configure the required parameters.
iii Save your changes.
8 Configure one or more LDAP authentication servers, as required.
i Click on the LDAP tab and click Create. The LDAP Authentication Server
(Create) form opens.
ii Configure the general parameters.
iii Configure the parameters in the Lookup Credentials panel, if LDAP
credentials are required to perform LDAP lookups.
Note — Do not select a user group that has the Apply Local
Authentication Only parameter enabled, or remote login attempts fail.
Note — The ID value that you specify defines the server priority. For
example, if multiple servers are specified, the 5620 SAM attempts user
authentication using the server that has the lowest ID value first. If the
server is unavailable, the 5620 SAM attempts to connect to the other
specified servers, in sequence, by ID.
Note — If the LDAP server allows anonymous user lookups, you can
enable anonymous LDAP lookups by leaving the parameters
unconfigured.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01