Troubleshooting guide

2 — 5620 SAM user security
2-38 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
This section of the file contains the maximum number of admin sessions that can
be configured.
max5620SAMAdminSessions="value"
where value is the max number of allowed admin user sessions.
6 Save and close the nms-server.xml file.
7 Open a console window.
8 Navigate to the /opt/5620sam/server/nms/bin directory.
9 Enter the following at the prompt:
bash$ ./nmsserver.bash read_config ↵
The main server reads the nms-server.xml file and the number of sessions defined.
10 Log out of the main server and close the open console windows.
Procedure 2-32 To configure the number of allowed client sessions
for a client delegate server
1 Using an account with Update permission on the Server package, choose
Administration→System Information from the 5620 SAM main menu. The
System Information form opens.
2 Click on the Client Delegate Servers tab.
3 Select a client delegate server and click Properties. The Client Delegate Server
(Edit) form opens.
4 Configure the Maximum UI Sessions parameter.
5 Save your changes and close the form.
Procedure 2-33 To enable secure access for remote LDAP users
Perform this procedure to enable the 5620 SAM to perform remote user authentication
and authorization via LDAPS.
Note — The 5620 SAM continues to accept new client sessions from a
client delegate server after the allowed number of sessions is reached.
The maximum number of sessions is used as a guide for balancing the
client session load among multiple client delegate servers.
Caution — Performing the procedure requires a restart of each main
server in the 5620 SAM system, which is service-affecting. You must
perform the procedure only during a scheduled maintenance period.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01