Troubleshooting guide

2 — 5620 SAM user security
2-28 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
iii Enable the Non-Web Override Global Timeout parameter.
iv Configure the Non-Web Client Timeout (minutes) parameter.
4 Save your changes and close the form.
Procedure 2-14 To configure the minimum allowable user name
length
1 Using an account with an assigned security scope of command role, choose
Administration→Security→5620 SAM User Security the 5620 SAM main menu. The
5620 SAM User Security - Security Management (Edit) form opens.
2 In the User Name panel, check the Enable box.
3 Configure the Minimum User Name Length Allowed parameter.
4 Save your changes and close the form.
Procedure 2-15 To configure authentication failure actions
You can specify an authentication message or a lockout for a user account that exceeds
the configured number of login authentication attempts. Only non–admin accounts can
be locked out. Admin accounts always have access.
1 Using an account with an assigned security scope of command role, choose
Administration→Security→5620 SAM User Security the 5620 SAM main menu. The
5620 SAM User Security - Security Management (Edit) form opens.
2 Click on the E-mail tab and configure the required parameters in the
Authentication Failure Actions panel.
If you set the Attempts before lockout parameter to 0, the lockout function is
disabled.
3 Save your changes and close the form.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01