Troubleshooting guide

2 — 5620 SAM user security
Alcatel-Lucent 5620 Service Aware Manager 2-23
5620 SAM
System Administrator Guide
3 Configure the required parameters.
4 If the user group is for OSS users or remote GUI users, configure the required
parameters in the Remote Users panel.
5 Select a scope of command profile in the Scope of Command panel.
6 Select a span of control profile in the Span of Control panel.
7 If you are modifying a user group, click on the Format and Range Policies tab. The
Select Format or Range Policies form opens.
8 Select one or more policies and click OK.
9 Save your changes and close the form.
10 If an active client GUI session is affected by the user group modification, restart
the GUI client.
Procedure 2-8 To add or remove workspaces for a user group
1 Choose Administration→Security→5620 SAM User Security from the 5620 SAM
main menu. The 5620 SAM User Security - Security Management (Edit) form opens.
2 Click on the User Groups tab.
3 Click Create or choose a user group and click Properties. The User Group
(Create|Edit) form opens.
Note 1 — When you change the scope of command or span of control
profiles of a group, the permissions of each user in the group are altered
immediately when you click OK.
Note 2 — You cannot delete a user group that contains users.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01