Troubleshooting guide

15 — As required maintenance tasks
Alcatel-Lucent 5620 Service Aware Manager 15-61
5620 SAM
System Administrator Guide
The OLC state of the selected object changes in the filtered list panel.
4 Close the form.
Procedure 15-33 To view or change the OLC state from the alarm
window
If required, create a filter
1 Click on the filter icon in the alarm window. A filter form opens.
2 Choose Assigned OLC State from the Attribute drop-down menu.
3 Configure the filter form to search for alarms. See the 5620 SAM User Guide for
more information about creating search filters.
Change the OLC state of an alarm
4 Select an alarm from the list. You can select multiple alarms at once.
5 Right-click on the alarm and choose Assign OLC State. The OLC State Assignment
form opens.
6 Choose Maintenance or In service from the Assigned OLC State drop-down menu.
7 Save your changes and close the form.
Procedure 15-34 To add the OLC state to a template using the GUI
builder
Some service objects have an OLC state property. You cannot configure the OLC state
property during the configuration of the service object. For 5620 SAM-created service
templates, the OLC state property is automatically added to the template. For
manually created service templates, the OLC state property is not added to the
template.
Note — You can configure the Revert OLC State parameter on the
properties form for the object. The Revert OLC State parameter allows
you to specify that the object automatically reverts to either the In
Service mode or the Maintenance mode after a selected time,
depending on the current OLC state of the object.
You can also configure the OLC state of a service or network object by
configuring the OLC State parameter on the General tab of the object
properties form.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01