Troubleshooting guide

15 — As required maintenance tasks
15-52 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
4 Log in to the database station as the Oracle management user.
5 Open a console window.
6 Enter the following:
bash$ path/install/config/samdb/SAMDb_exportImport.sh -i source
↵
where
path is the database installation location, typically /opt/5620sam/samdb
source is the absolute path of the directory that contains the exported database file set
The following prompt is displayed:
Using DB_INSTALL_BASE = path/install
Please enter the ORACLE_SID (samdb1):
7 Specify the 5620 SAM database instance name and press ↵. The following prompt
is displayed:
Accept "instance_name" [y/n/q]? (y):
8 Press ↵ if the value is correct, or type n ↵ to re-enter the value. The following
messages and prompt are displayed:
Using ORACLE_SID = instance_name
Using ORACLE_HOME = /opt/5620sam/oracle12r1
Setting PATH to /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/s
bin:/usr/bin:/root/bin:/opt/5620sam/oracle12r1/bin
Enter the password for the "sys" user (terminal echo is off):
9 Enter the Oracle SYS user password and press ↵.
The following prompt is displayed:
Accept value? [y/n/q] (y):
10 Press ↵ if you are sure that the password is entered correctly, or type n ↵ to
re-enter the value.
The following prompt is displayed:
Enter the password for database_user (terminal echo is off):
11 Enter the database user password and press ↵.
The following prompt is displayed:
Accept value? [y/n/q] (y):
Note — To display the script usage, specify the -h option, as follows:
SAMDb_exportImport.sh -h ↵
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01