Troubleshooting guide

15 — As required maintenance tasks
15-44 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
35 Perform the following steps to enable the standby 5620 SAM main server startup
daemon.
i Log in to the standby main server station as the root user.
ii Open a console window and enter the following:
# cd /etc/init.d ↵
iii Enter the following:
# mv inactive.5620SAMServerWrapper 5620SAMServerWrapper ↵
36 Perform the following steps to start the standby 5620 SAM main server.
i Log in to the standby main server station as the samadmin user.
ii Enter the following:
bash$ cd /opt/5620sam/server/nms/bin ↵
iii Enter the following to start the 5620 SAM server:
bash$ ./nmsserver.bash start ↵
To restore 5620 SAM database redundancy, you must reinstantiate the
primary database on the standby database station. See Procedures 15-23
and 15-24 for information.
Procedure 15-23 To reinstantiate a 5620 SAM database using a client
GUI
Perform this procedure to reinstantiate a restored primary 5620 SAM database on a
standby database station in a redundant 5620 SAM system using a client GUI.
1 Choose Administration→System Information from the 5620 SAM main menu. The
System Information form opens.
2 Click Re-Instantiate Standby and confirm the action. The database reinstantiation
begins.
Note 1 — You require samadmin user privileges to perform this
procedure.
Note 2 — The 5620 SAM client GUI displays a progress indicator during
the reinstantiation, unlike a CLI-based reinstantiation.
Note — The Re-Instantiate Standby button may not display depending
on your scope of command. See the 5620 SAM User Guide for more
information about scope of command.
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01