Troubleshooting guide

15 — As required maintenance tasks
15-40 Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
System Administrator Guide
Checking user username...
Adding username...
Changing ownership of the directory /opt/5620sam/oracle12r1
to username:group.
About to unlock the UNIX user [username]
Unlocking password for user username.
passwd: Success
Unlocking the UNIX user [username] completed
Please assign a password to the UNIX user username ..
New Password:
21 Perform one of the following.
a If you specify a new user in step 20, the following prompt is displayed:
Please assign a password to the UNIX user username ..
New Password:
Perform the following steps.
i Type a password and press ↵. The following prompt is displayed:
Re-enter new Password:
ii Retype the password and press ↵. The following message is displayed if
the password update is successful:
passwd: password successfully changed for username
b If you specify an existing user in step 20, the following prompt is displayed:
Do you want to change the password for the user username?
[Yes/No]:
Type No ↵.
22 The following prompt is displayed:
Specify whether a 5620 SAM server will be installed on this
workstation.
The database memory requirements will be adjusted to account for
the additional load.
Will the database co-exist with a 5620 SAM server on this
workstation [Yes/No]:
Enter Yes or No, as required, and press ↵.
Messages like the following are displayed as the script execution completes:
INFO: About to set kernel parameters in /etc/sysctl.conf...
Release 13.0 R2 | May 2015 | 3HE 09815 AAAB TQZZA Edition 01